Single-wall chimneys, stainless steel

Company roofing.com.ua stops selling brand Kominvent chimneys, and offers products, in our view, a higher quality brand of Sofia.

For single-pipe chimney - a destination: gilzovka brick chimney channels (protection from the damaging effects of condensation), an internal connection to the chimney with insulation.

Pipe for a chimney, single 1m Stainless Steel

Material:

Stainless Steel

Single wall flue pipe 1m stainless steel base element for komlpektatsii and installation of flue and vertical sections.

Stainless steel flues connected to each other and with other elements of single-wall stainless steel flues without an additional fixing

Pipe for a chimney, single 0.5m stainless steel

Material:

Stainless Steel

Single-wall flue pipe 0.5m stainless steel base element for the assembly and installation chimney and vertical sections.

Tubes for chimneys connected to each other and with other components of a single-walled stainless steel chimney without fixing

Pipe for a chimney, single 0.33m Stainless Steel

Material:

Stainless Steel

For single wall flue pipe 0.33m Stainless basic element for the assembly and installation of the chimney and horizontal sections.

Stainless steel flue pipes connected to each other and other elements of single-wall stainless steel flues without additional fastening.

Rosetta for the chimney of stainless steel

Material:

Stainless steel

Rosetta for the chimney of stainless steel designed to impart a beautiful view, places the passage through the chimney vertical overlap.

With the elements of the chimney without additional fasteners.

Flue elbow 45 °, stainless steel

Material:

Stainless steel

Knee for the chimney 45 ° stainless steel consists of two parts welded together tubes at 45 º.

Knee for the chimney at 45 ° with the elements of the system Stainless steel chimneys without additional fasteners.

Chimney Elbow 90 ° Universal, Stainless Steel

Material:

Stainless steel

Chimney Elbow 90 ° Universal, made ​​of stainless steel, consists of four rotary elements of the pipe to the necessary angle of the chimney from 0 to 90 º.

Chimney Elbow 90 º universally connected with the elements of a chimney made ​​of stainless steel without additional fasteners.

Chimney tee 45 ° stainless steel

Material:

Stainless steel

Chimney tee 45 ° stainless steel, designed for the flue in the chimney and provides the opportunity to clean and maintain chimney with cutting off the condensate.

Chimney tee 45 ° combined with elements of stainless steel flues without additional fastening.

Chimney tee 87 ° stainless steel

Material:

Stainless steel

Tee 87 ° stainless steel, designed for the flue in the chimney and provides the ability to clean and maintain chimney with a cutoff of condensate. To exclude the ingress of condensate tee 87 ° drip edge installed. Typically used in komlpekte with revision or watering can.

Tee 87 ° with the elements chimney without additional fastening.

The audit for the chimney, stainless steel

Material:

Stainless steel

Revision of the chimney stainless steel, designed for internal inspection, maintenance and cleaning chimney soot, as well as serves as a support for the chimney of stainless steel. Revision of the chimney is installed at the base of a vertical shaft single-walled chimney with stainless steel under the tee 87 or the tee 45.

Trap watering, stainless steel

Material:

Stainless steel

Watering can trap designed to remove kondansata of chimney outside. Lake trap installed underneath a tee 87 tee 45.

Fungus baffle stainless steel

Material:

Stainless steel

Fungus stainless steel deflector is installed on top chimney and is designed to protect chimney from rain. Deflectors fungi are not installed on the chimney flue for gas boiler.

Baffle chimney flue connects with elements of stainless steel without additional fastening.

Wind vane chimney, stainless steel

Material:

Stainless steel

Wind vane chimney stainless steel, is installed on top chimney, provides protection chimney from falling precipitation and excludes wind blowing out at chimney (protection from reverse thrust). Mechanical connection of the chimney wind vane requires periodic maintenance heat-resistant grease.

Weathervane with the elements of stainless steel chimney systems without additional fastening.

End of the chimney, stainless steel

Material:

Stainless steel

End of the chimney, stainless steel, is used to install on top of brick chimney. End of the brick chimney prevents precipitation inside the brick channel.

End of the flue pipe connects to the chimney without fixing:.

Chimney adapter reducer, stainless steel

Material:

Stainless steel

Reducing Adapter Stainless Steel, designed to connect to chimneys and other parts of the chimney of various diameters.

Reducing adapter connects to the elements of the flue system without additional fastening.

Mounting bracket, stainless steel

Material:

Stainless steel

Mounting bracket, stainless steel, designed for mounting vertical shaft and horizontal part chimney to the wall with extension stud M8 and M12.

Schieber chimney (Cagle) stainless steel

Material:

Stainless steel

Gate for the chimney, stainless steel, designed to control the traction in chimney. According to fire regulations in Ukraine gate should not overlap the section chimney by more than 85%.

Schieber chimney (Cagle) is connected with the elements of the pipe for chimneys without additional fastening.

Volper deflector, stainless steel

Material:

Stainless steel

Volper deflector mounted on top of the chimney and is designed to enhance and stabilize the draft in the chimney. Deflector also protects the chimney flue from falling precipitation and strong crosswinds.

Deflector volper connected with pipes for chimneys without additional fastening.