Company roofing.com.ua stops selling brand Kominvent chimneys, and offers products, in our view, a higher quality brand of Sofia.

Air ducts for ventilation - galvanized ducts and rectangular ducts - Assignment: Completion of the ventilation system galvanized ducts.

Turbowent vent stainless steel

Material:
Stainless steel. Turbowent stainless steel mounted on the end of air duct ventilation system. Turbowent designed to enhance the rate of outflow of air in ventilation systems.
Турбовент применяется исключительно в системах вентиляции и не пригоден для систем дымоотвода. Note:. Turbowent applies only to systems of ventilation and is not suitable for chimney systems.

Duct for ventilation 1m galvanizing

Material:
Galvanized steel

1m vent pipe is a basic element of the system ducts. Ducts are manufactured in the same insulated performance. Vent pipes of circular cross section are the ideal solution for the ventilation system.
1m galvanized duct connected to the system elements vent pipe without additional fastening.

Duct for ventilation of 0.5m galvanizing

Material:
Galvanized steel

Vent pipe 0.5m is a basic element of the system galvanized ductwork. Pipes for ventilation are made as in insulated versions. Vent pipes of circular cross section are the ideal solution for the ventilation system.

0.5m galvanized duct connects with the elements of the duct system for ventilation without additional mounting ..

Elbow 45 ° ventilation galvanizing

Material:
Galvanized steel

Elbow 45 ° vent allows you to change the direction of the ventilation system at an angle of 45 º. Elbow 45 ° for ventilation is installed as a vertical and in horizontal ventilation vozzuhovodov.

Elbow 45 ° galvanized connects with air ventilation without additional fastening.

90 ° elbow vent galvanized

Material:
Galvanized steel

90 ° elbow vent allows you to change the direction of the ventilation system at an angle of 90 º. Mounted on the vertical sections.

90 ° elbow connected with galvanized ducts for ventilation without additional fastening.

Tee 45 ° vent galvanized

Material:
Galvanized steel

Tee 45 ° vent is designed to exhaust air in the ventilation system. Typically tee is used, complete with watering can. Made the same way in the insulated performance.

Tee 45 ° galvanized pipe connects to the elements for ventilation without additional fastening.

Tee 87 ° vent galvanized

Material:
Galvanized steel

Tee 87 ° vent is designed to exhaust air in the ventilation system. Typically tee is used, complete with watering can. Made the same way in the insulated performance.

Tee 87 ° zinc combined with elements of air for ventilation without additional fastening.

Tee "Y" vent galvanized

Material:
Galvanized steel

Tee "Y" vent is designed to connect multiple branches of the ventilation system.

Tee "Y" zinc combined with other components pipes for ventilation without additional fastening.

Dispenser vent galvanized

Material:
Galvanized steel

Dispenser vent is designed to connect multiple branches of the ventilation system.

With the elements of the ventilation system without additional fastening.

Sliding vent galvanized

Material:
Galvanized steel

Cagle ventilation designed to regulate the exhaust air flow in ventilation systems.

Schieber ventilation ducts connected to the elements without any additional fastening.

Air Filter galvanizing

Material:
Galvanized steel

Air filter designed for air filtration in ventilation systems.

With the elements of the ventilation system without additional fastening.

Galvanized watering can

Material:
Galvanized steel

Lake is designed for installation on the bottom vent tee.

Vent adapter zinc

Material:
Galvanized steel

Vent adapter used to navigate to the circular ducts to rectangular ducts.

With the elements of the ventilation system without additional fastening.

Fungus vent galvanized

Material:
Galvanized steel

Fungus vent installed on top of the ventilation duct. Designed to protect the ventilation system from precipitation.

With the elements of the ventilation system without additional fastening.

Volper vent galvanized

Material:
Galvanized steel

Volper vent installed on top of the ventilation duct. Designed to protect the ventilation system from precipitation.

With the elements of the ventilation system without additional fastening.

Podreshetnik

Material:
Galvanized steel

Podreshetnik used for installation of rectangular ducts in the ventilation system of circular cross section.

With the elements of the ventilation system without additional fastening.