Recommendations for caged

How to start your garden plot? Many people wonder about the suburban building from that issue. The answer sort of suggests itself, of course with the fence that we like to install. In western Europe, is not so prevalent this problem, which often do no fences, but only a rare green border plants were planted along the plot. But we are in Ukraine, where the word fence perceived restful sleep that we currently provide while at the closed area from prying eyes. We begin our series of articles in the issue of erection of the fence with their hands out of decking material.
In addition, this material is becoming more popular in our country. The main, and perhaps the main advantage of a fence made of corrugated board is its duration of use or in other words, life, just to not less merit is its versatility. What is de profiled? Corrugated or trapezoidal sheet for the fence - a metal sheet, made from galvanized iron or steel coated with a polymer coating, or forming part of it. Trapezoidal sheet attached to the wave shape for increased rigidity of the material. Profiled for a fence varies in height corrugations of the same shape and width. It can also vary in color and, spray applied thereto.
So you've decided to build a fence. To get started you need to identify with the color chosen trapezoidal sheet, as the color of the fence must be compatible with the roof of your building, but the question we leave to your discretion, as the number of colors so much and opinions. The second step is the choice of trapezoidal sheet to determine the shape trapezoidal sheet with square or circular waves. All you have chosen something that suits you, go directly to the construction of the fence. We expect the length of our fence and height. Note on the scheme, where at the gate will be, and where the gates. On this basis, we get the length of Nago fence, we can now pick up the remaining materials for construction.
Poles that fit under the fence of corrugated wall thickness must be at least 1,3 - 1,5 mm and the thickness prozhilin between the posts not less than 0,9-1,0 mm and it provided that you use the pillars of otsinkovonnogo material, if poles and prozhiliny purchased you have no cover then the wall should be slightly more subject to processing your iron primer on metal and iron compounds prolonging life in bad weather. Due to the fact that the galvanized metal little roads in our reality, consider the option to install on the iron poles are not prepared and not treated with nothing. Depending on the height of your fence, each post must be at least as long, plus a half-meter or 150 centimeters that will be installed in the ground. And so you choose the fence height of two meters from walking out of this down your images must be equal to 3, 5 meters or 350 centimeters. This is assuming that your site has no bias on the surface, otherwise you will have to pick up a number of columns depending on the terrain, focusing on the length of the pillars of what would be the upper edge of your fence has been relatively flat to the highest point of the fence.
Now we look forward prozhiliny length of each must be equal to the distance between the pillars, namely, no more than two meters. Poles and prozhiliny processed material for the chemical surface treatment before painting ZINOL (tsinkonapolnennaya primer on steel).

Source: best-level.uaprom.net